FM-200 System Installations &Testing

---

Aissol provides complete FM-200 system services, including sales, installation, inspection, recharge, testing, and more. We also have an FM-200 system installation guide! We can provide the inspection and maintenance schedule to keep your system in compliance, as well as keep accurate inspection and maintenance records that are required by code and AHJ officials.

We provide immediate response to fire suppression system discharges, whether accidental or from a fire, to get your system back into service as quickly as possible.

Some of our FM-200 testing, inspection, and installation services include:

• Testing and cleaning all detectors
• Verifying shutdown and evacuation circuits
• Verifying cylinder pressures and weights
• Checking for changes in hazard integrity
• Checking input and output circuit supervision
• Simulating system discharge and testing releasing circuits
• Visually inspecting agent piping and nozzles
• Checking hydro test dates for cylinders and discharge hoses

Our fire protection team is ready to support your organization’s fire protection systems and service requests 24 hours a day.

Wet Chemical Systems

Pre-engineered kitchen fire suppression systems protect the hood, duct and cooking appliances in the kitchen. When a fire starts, the detection network will automatically detect a fire and release chemical throughout the hood, and on the appliances. Also, a manual pull station can be used to release the chemical over the fire. As the system is discharged, gas and/or electric cooking power will be shut-down to the appliances. Maintenance on kitchen fire suppression systems must be conducted at least semi-annually in accordance with Fire Code and NFPA 17A requirements as well as the manufacturer’s listed installation and maintenance manual. 

The system shall be pre-tested prior to Final inspection to determine that the system is properly installed and functions in accordance with the approved plans and the manufacturer’s installation and maintenance manual. Testing during the Final inspection shall include:

• Manual activation via manual pull
• Automatic activation via fusible link.
• Shut down of all electrical and gas cooking equipment shall also be demonstrated.
• A puff test will be required to demonstrate distribution piping continuity and proper nozzle operation.
• If applicable, fire alarm activation
• Make-up air unit shut-down upon fire system activation

Nozzle type, height, and orientation relative to placement of cooking appliances will also be verified during the inspection.

The extinguishing system shall be maintained in accordance with the manufacturer’s requirements and with the following:

• Extinguishing systems shall be serviced at least every 6 months or after activation of the system.
• Maintenance shall be conducted in accordance with the manufacturer’s listed installation and maintenance manual.
• Inspection shall be by qualified individuals, and a certificate of inspection shall be forwarded to the fire code official upon completion.
• Records of all system inspections, tests and maintenance required by the referenced standards shall be maintained on the premises for a minimum of 3 years and shall be copied to the fire code official upon request.
• The hood ventilation system shall be operated at the required rate of air movement, and approved grease filters shall be in place when cooking equipment under a kitchen grease hood is operated.
• Hoods, grease-removal devices, fans, ducts, and other appurtenances shall be periodically cleaned to prevent grease accumulation.
• Cleanings shall be recorded and records shall state the extent, time, and date of cleaning and the date of the next scheduled cleaning.
• Such records shall be maintained on the premises.

Foam Fire Suppression System

Foam fire suppression systems work by cutting off the fuel source from oxygen and preventing combustion. Once the foam is ejected, it can quickly expand—depending on the type of foam fire suppression system being used, the foam can expand up to 1000 times. High-expansion foams (those that expand at a rate of 200 – 1000 times) are ideal for large areas that need to be filled very quickly, such as airport hangars.

At Aissol, we provide complete foam fire suppression system services, including:

Installation & Replacement:  Whether you are looking to install a foam suppression system for the first time, or need to replace your current one, Confires can help. Each of our technicians is highly experienced in foam suppression and can answer any questions you may have throughout the installation process.

Repair & Maintenance: Make sure your foam suppression system is serviced annually to ensure that it is in total working order. Our professional services will reveal any potential issues with the system and we will repair any problems that arise during inspection.

Testing: You must have your foam fire suppression system professionally inspected to ensure that it is effective and ready to operate when needed.